The TitanEA features the same Titan triaxial sensor and digitizer/recorder technology as the TitanSMA. The TitanEA comes in two models: the TitanEA Master has a GNSS receiver to get timing from satellites and acts as a network time master to supply timing over Ethernet to TitanEA Slaves..
Deploy the TitanEA in any structure with only a single Ethernet CAT5 cable for all functions: power, precision timing, data, and management. Ethernet connectivity eliminates the need to reroute expensive analogue cables throughout a structure and provides maximum flexibility in sensor placement.
Precision Time Protocol (PTP) provides timing accuracy of <100µs:
Network Time Protocol (NTP) permits the time source to be not on the same local LAN subnet.
The TitanEA facilitates central control room monitoring of a structure, allowing operators to monitor the PGA, PGV, PGD, and SA of all sensors in the network, in real-time, on a convenient display.
Each sensor in the network can be accessed independently using any mobile device with Internet access. Structural engineers can quickly view instrument status and events anywhere, anytime.
Specifications are subject to change without notice.
|Feedback||Force balance with capacitive transducer|
|Mass Centering||Electronic offset zeroing via user interface|
|Self-noise||See self-noise graph|
|Nominal Sensitivity||750 V-s/m (reference User Guide for precise value)|
|Precision||±0.5% relative to User Guide specification|
|Bandwidth/120s||-3 dB points at 120 s and 108 Hz|
|Bandwidth/20s||-3 dB points at 20 s and 108 Hz|
|Clip level||26 mm/s up to 10 Hz and 0.17gabove 10 Hz|
|Oper Tilt Range/120s||±2.5º|
|Oper. Tilt Range/20s||±10º|
|Parasitic Resonances||None below 200 Hz|
|Dynamic Range||> 152 dB @ 1 Hz|
Detailed specifications in the brochure..
powered by: nanometrics